Custom Products

Custom Inverter


The development of the standard inverter has been focused on a series of customizations that allow the use of final products with a inside and  customized inverter in an easy, fast and optimized  solution.

Optimized drives for special market  for custom applications.
Optimization is essentially determined  from :

  • minimum dimensions because the drives  are inside  the final product.
  • minimum cost due : only what is necessary for the specific application is realized.

 

Low voltage custom – small drive: 0.18 – 2.2 KW / 100 – 230 – 480 V.

Low voltage custom:  0.75 – 45 KW / 380 – 480 V.

Decentralized solutions for motor mounting or wall mounting.

Low and medium voltage systems – filters for low harmonic distortions – regenerative systems.

Low voltage series: 0.18 – 2.2 KW / 100 – 230 – 480 V SMALL DRIVE IP00

EXAMPLE 1: LOW VOLTAGE SERIES > small drives
0,18 – 2,2 KW / 100 – 230 – 480 V

Product to be used in electrical cabinets or machines that have small spaces to allow the use of inverters for speed regulation.

EXAMPLE 2: LOW VOLTAGE SERIES
0,18 – 2,2 KW / 100 – 230 – 480 V

Product customized according to the size, shape and dimension of the final product where it should be inserted.

Low voltage series 0,75 – 45 KW /  80 – 480 V

EXAMPLE 1: LOW VOLTAGE SERIES
0,18 – 2,2 KW / 100 – 230 – 480 V

Designed to be installed inside a dedicated housing and able to use any cooling system, depending on the installation requirements. The housings can be sealed and therefore a high degree of protection is easier to obtain. The electrical panels can therefore be smaller with a significant reduction in costs.

EXAMPLE 2: LOW VOLTAGE SERIES
0,75 –  KW / 100 – 230 – 480 V

This drive can be cooled either by liquid or using an air heat sink. Since the inverter may not be equipped with dissipating fins, the space for installation can be significantly reduced. The cabinets can therefore be smaller with a significant reduction in costs.

The housings can be sealed and therefore a high degree of protection is easier to obtain. This is an advantage in dusty and humid environments where the flow of air through the electrical panel risks causing damage to the equipment inside. It can be used in particularly aggressive environments where the operating temperature (inside the customer’s housing) can reach high values up to 70 ° c.

The mechanical dimension does not define the size of the rear-panel heatsink.

Decentralized solutions for motor mounting or wall mounting

Inverter for decentralized applications designed for mounting on the motor terminal box or for IP66 wall-mounting solutions. High degree of protection: (IP66 / IP67 – NEMA4).

Robust aluminum housing suitable for applications in critical environments.

Innovative thermal management: no thermal interference between the inverter and the motor: all active components are built into the cover .

Developed with focus on IEC standard motors: simple mechanical adaptation to different terminal blocks.

Low and medium voltage systems – filters for low harmonic distortions – regenerative systems – AFE

LOW VOLTAGE: 1,5 -2200 KW / 230 – 690 v AC
COOLING: liquid or compressed gas.

MEDIUM VOLTAGE: 0,4 – 6000 KW / 0,23 Kv – 13,8 kv

Do you want further information about our products?

Feel free to contact us
Contact us